ETO Sterilizer

Product Description

ETO Sterilizer Advantages:

• Regulation system renders stern control of room temperature, aeration/exposure time, vacuum, etc. in order to confirm precise and consistent performance.
• Cycle advances mechanically through space, exposure, disinfecting and aerating stages, which clasped in memory even if energy outage happens.
• Display on the regulation panel shows particular phases in the course of operation.
• A leak check task takes a foresight of any outflow feasibility and the vessel can be began only when the void is entirely drawn.
• Use independent gas tin of pure ethylene oxide. It evicts probable leakage from fittings or tanks.
• Dismissive chamber force ensures that air cannot leak into the operating place.
• There is no discharge of E.O. air till perforation occurs in the inner part of sterilizer. The whole vacuum is drawn only when the door is locked.
• Aeration system minimizes the chances for function exposure to E.O.
• An good gas filter is utilized to avert adulterated air from incoming into the room.
• The structure of the cabinet and chamber are created by standard stainless steel for effective performance of resistance against corrosion.
• The material used in construction of internal chamber is SS 316.
• PLC- Screen: 4"3' Color tap display.
• Mechanization Hardware: PLC (GRADE 1 DIV2 Units ABCD and CE approved

Safety Devices of Ethylene Oxide Sterilizer:

• Series does not begin unless room is locked and signal of unlocked door is shown on the regulation panel.
• Elevated temperature difference in chamber activates hearable alarm and preventive device crops off the heating point immediately.
• An emanate inspect function take a fore acknowledge of any discharge probability and the sterilizer can only starts when the space is totally drawn.
• RCCB defends control parts when short circuit or overburden occurs.